While making my herringboned fichu, I realized it was about time to post a new tutorial. So I thought I would show you how I made the open seam at the back.
Open work is something I had always wanted to learn, because it never fails to look delicate, wherever you put it. But, so far, I have not found a go-to tutorial for it. When making the 18th-century baby caps for my cousins, I tried my hand at fagotting. It is very similar to what I did on the fichu, only with a more complicated stitch. I could not really wrap my head around it and eventually opted for a basic whipstitch finish.
Then I remembered that herringbone stitch can also be used for open work. And here we have it, simple and pretty. If you have not seen herringbone stitch before, here is a very good video tutorial. We will be doing just the same to create the open seam. The only difference will be the gap between the two stitch lines.
Now that you have familiarized yourselves with the stitch… off we go!
You will need:
- The two pieces you want to join.
- A thread of your choice. You can match it or just go wild with colours. Sewing thread might be too thin. What works well are fillet crochet yarn (no. 80 or 100), silk buttonhole or one to two strands of embroidery floss.
- A matching needle. For best results, it should be smallish and sharp.
- A piece or strip of paper as long as your fabric edge. It need not be wider than 1″.
- A cushion to anchor your work. A small sofa cushion or throw pillow will do.
- A ruler and pencil.
How it is done:
- Finish your fabric edges. Before you start, the two edges you are stitching over need to be hemmed. Hemming any other edges is advisable, though, especially if your fabric is on the sheer side. Narrow hand-rolled hems work well. You can use them to get some extra stability for your seam (see below).
- Use your paper and pencil to make a template. Basically you draw two parallel lines, each one as long as your fabric edges. The space between the lines should be between 1/4″ to 1/8″. For the tutorial I started with 1/2″, but eventually went with 1/4″ for the fichu.
- Secure the template on the cushion with pins. Make sure it lies flat.
- Now pin your fabric pieces onto the cushion. Match the fabric edges you are working on with the lines on the template.
- Thread your needle. If you have wax to hand, waxing the thread is a good idea. Now bring your needle underneath the hem on the back of your fabric and bury the knot between the layers. Then bring the needle to the front. It should come up at the top edge of one piece, a little ways away from the working edge.
NB: If you have a rolled hem, come up right at the inner edge of it. Working the herringbone over the hems will help stabilize the stitch.
- Work the herringbone stitch between the edges until your seam is done. Try to keep an even tension to avoid puckering or loose stitches.Take the needle to the back to finish off.
- When you reach the end of the seam, take your needle to the back, coming up on the hem.
- Knot off the thread and bury the tail between the layers at the hem. And, tadah, your open seam is all done!
And that is it already. Easy, right? The next level would be to use a double herringbone stitch instead. Here is a video tutorial for that one. Try not to get dizzy. I still do sometimes! ;)
I hope you found this brief tutorial useful. If you have any questions, do not hesitate to let me know. I cannot wait to see your own, beautiful open work creations!