As I take a break from sewing the sleeve wings on my 1630s bodice, I am using the time to finally share a bit about my new smock apron with you. It came together in the last “bodice break”. So far, I did not have the chance to wear it with my costume. But that is definitely still on the to-do list, now spring is finally here. And it definitely took its sweet time to come out this year. Another thing still on my blogging sheet is a drafting tutorial for the apron bodice. More about that below.
First off, let us talk about the construction process a bit. I started by self-drafting the bodice and skirt based on this apron in the Colonial Williamsburg collection. Their site does not have permalinks. For a look at the details, just type the accession number into the search box. :)
Regency smock apron, c. 1800-20, Colonial Williamsburg collection. Acc. Number 1995-33
Since I only had the one image to work off, I loaded it into Inkscape and scaled it up, based on the given length of 46″. This did not really provide accurate measurements, but gave a good estimate of the dimensions. Based on that, I drafted and mocked up the bodice pieces. Eventually I came out with this piece, which I hand-finished with 1/4″ hems around the edges. The insides are finished with a bias strip that holds a drawstring case.
The apron bodice.
The bodice front is basically a trapezoid that gets its Regency-esque shape from the gathers at CF. The two skirt panels are joined on the bias in front and contribute to this look, too. It is pretty straightforward but since a few people asked about how exactly it is done, I will try to put up a drafting tutorial once I can track down my draft sheet and notes.
When cutting the skirt, I forgot that my fabric was printed, not yarn-dyed. Duh. So I ended up piecing one of the miscut panels. But it was only half bad. I accidentally matched the pattern and, besides, piecing adds some period appeal, right?
Joining the bodice to the skirt. The armholes are open at the bottom and only joined through the skirt seam.
The apron closes at the neck and waistline. At the top, the neckline drawstring provides the ties. For the waist, I made two narrow 12″ ties from fabric scraps.
Yay, waist ties, turned inside out with a shishkebab stick.
And that was that. The apron is done and currently sitting on the dressform.
The finished smock apron.
As a little bonus, I made a fabric bunny out of the scraps, just in time for Easter. He looks a bit like a Lindt bunny, but will last longer, due to lacking chocolate content.
Mr. Apron Scrap Bunny. :D
And here are the HSM challenge facts:
The Challenge: #3 – Comfort At Home
Material: 1 1/2 yards checked cotton broadcloth.
Pattern: My own, based on an extant apron at Colonial Williamsburg (Acc. No. 1995-33).
Notions: 1 1/2 yards 3/8″ twill tape; cotton thread; linen twine for the drawstring eyelets at the front.
How historically accurate is it? I did not manage to source a yarn-dyed, woven check on short notice, so I went with a printed fabric (I found a much better one, just when the apron was finished…). So I have to mark myself down. Same for working off one image without a closer look at the construction details. But it is all hand-sewn. :) Overall, I would give it 80% accuracy.
Hours to complete: About 24 hours.
First worn: Around the house. :D
Total cost: € 13.